Titanium dioxide is one of the many oxides formed naturally in our environment. Manufacturers source this mined mineral from rutile, brookite, and anatase. It is then processed and refined to meet stringent safety guidelines based on the end-use for the mineral. 

Titanium Dioxide is largely produced by the reduction of titanium tetrachloride, obtained in turn from chlorination of natural rutile, synthetic rutile derived from ilmenite or even slags rich in TiO2 produced by metallurgical treatment of ilmenite. TiO2 is also manufactured by treatment of ilmenite with sulfuric acid. Raw materials and the respective production processes employed in the manufacturing of Titanium Dioxide are listed below.

In food, titanium dioxide is often used as an artificial color additive. Tasha Stoiber, senior scientist at the consumer health nonprofit Environmental Working Group, says titanium dioxide can generally be thought of as a paint primer – it often goes on a hard-shelled candy like Skittles before the color is added to give it a uniform shine.

TiO₂ NPs appeared to be more toxic to nematode Caenorhabditis elegans than submicron-sized TiO_2.  At a concentration of 1 mg/l, 7 nm particles affected its fertility and survival rate and were more toxic than 20 nm anatase particles. Similarly, Hu et al. showed that rutile particles (10–20 nm), at concentrations above 1 g/kg soil, can be bio-accumulated in earthworms, where they induce oxidative stress, inhibit the activity of cellulase and induce DNA and mitochondrial damage.

Different dermal cell types have been reported to differ in their sensitivity to nano-sized TiO₂ . Kiss et al. exposed human keratinocytes (HaCaT), human dermal fibroblast cells, sebaceous gland cells (SZ95) and primary human melanocytes to 9 nm-sized TiO₂ particles at concentrations from 0.15 to 15 μg/cm² for up to 4 days. The particles were detected in the cytoplasm and perinuclear region in fibroblasts and melanocytes, but not in kerati-nocytes or sebaceous cells. The uptake was associated with an increase in the intracellular Ca²⁺ concentration. A dose- and time-dependent decrease in cell proliferation was evident in all cell types, whereas in fibroblasts an increase in cell death via apoptosis has also been observed. Anatase TiO₂ in 20–100 nm-sized form has been shown to be cytotoxic in mouse L929 fibroblasts. The decrease in cell viability was associated with an increase in the production of ROS and the depletion of glutathione. The particles were internalized and detected within lysosomes. In human keratinocytes exposed for 24 h to non-illuminated, 7 nm-sized anatase TiO_2, a cluster analysis of the gene expression revealed that genes involved in the “inflammatory response” and “cell adhesion”, but not those involved in “oxidative stress” and “apoptosis”, were up-regulated. The results suggest that non-illuminated TiO₂ particles have no significant impact on ROS-associated oxidative damage, but affect the cell-matrix adhesion in keratinocytes in extracellular matrix remodelling. In human keratinocytes, Kocbek et al. investigated the adverse effects of 25 nm-sized anatase TiO₂ (5 and 10 μg/ml) after 3 months of exposure and found no changes in the cell growth and morphology, mitochondrial function and cell cycle distribution. The only change was a larger number of nanotubular intracellular connections in TiO₂-exposed cells compared to non-exposed cells. Although the authors proposed that this change may indicate a cellular transformation, the significance of this finding is not clear. On the other hand, Dunford et al. studied the genotoxicity of UV-irradiated TiO₂ extracted from sunscreen lotions, and reported severe damage to plasmid and nuclear DNA in human fibroblasts. Manitol (antioxidant) prevented DNA damage, implying that the genotoxicity was mediated by ROS.

With its storied history and distinct properties, lithopone remains a subject of historical significance and contemporary relevance. While its applications and popularity have evolved, its role in the annals of pigment history is indisputable.

Resumo–Este artigo discute a descoberta de litopônio fosforescente em desenhos de aquarela do artista americano John La Farge datados de entre 1890 e 1905 e a história do litopônio na indústria de pigmento no final do século XIX e início do século XX. Apesar de ter muitas qualidades desejáveis para o uso em aquarela branca ou tintas a óleo, o desenvolvimento do litopônio como um pigmento de artistas foi prejudicado por sua tendência a se escurecer na luz solar. Sua disponibilidade para e uso por parte de artistas ainda não está clara, uma vez que os catálogos comerciais dos vendedores de tintas geralmente não eram explícitos na descrição de pigmentos brancos como algo que contém litopônio. Além disso, o litopônio pode ser confundido com o branco de chumbo durante o exame visual e sua fosforescência de curta duração pode ser facilmente perdida pelo observador desinformado. O litopônio fosforescente foi documentado em apenas um outro trabalho até hoje: uma aquarela de Van Gogh. Além da história da manufatura do litopônio, o artigo detalha o mecanismo para a sua fosforescência e sua identificação auxiliada pela espectroscopia de Raman e espectrofluorimetria.

Size, Share, Competitive Landscape and Trend Analysis Report by Application (Paints and Coatings, Plastics, Printing Inks, Paper and Pulps, Rubber, Leather, and Others): Global Opportunity Analysis and Industry Forecast, 2020-2027

A legal additive in the United States, titanium dioxide is used in everything from food to consumer goods and the U.S. Food and Drug Administration says regulated use of the product as a color additive in food is safe within certain restrictions.

Conclusion:

Given its widespread use, finding reliable suppliers of barium sulphate is crucial for industries that rely on this compound. Many companies specialize in the production and distribution of barium sulphate, ensuring that businesses can source high-quality materials tailored to their specific needs.

Asia

In addition to controlling the reaction conditions, it is also important to carefully monitor the precipitation process to ensure that the desired precipitation percentage is achieved. This can be done through various analytical techniques, such as X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, which can provide valuable insights into the particle size distribution, crystallinity, and purity of the titanium dioxide product.

Blanc de lithopone, blanc de Comines, zincolith, blanc de Charlton, blanc de Becton, tithopone

What exactly is titanium dioxide?

Magnesium occurs in seawater and in ores such as dolomite (CaCO ₃ MgCO ₃), magnesite (MgCO ₃), and carnallite (MgCl ₂ KCl 6H ₂O).

≥99.0

What is an exposure route?